Cabletron Systems HSIM-W6 manual Wpim

Chapter 5: Installation

Standoff Screws

WPIM

Coverplate

HSIM Standoffs

Figure 11 Removing the WPIM Coverplate

3.Remove and save the two HSIM faceplate screws attaching the faceplate to the HSIM printed circuit board (PCB). Remove the HSIM faceplate (see Figure 3).

4.Carefully align and gently insert the WPIM connector onto the WPIM connector pins on the HSIM-W6.

5.Press down firmly on the WPIM until the pins slide all the way into the connector. Ensure that the WPIM seats firmly on the standoffs.

6.Secure the WPIM to the three standoffs using the screws that are provided with the HSIM-W6.

7.Reattach the faceplate to the HSIM using the two screws saved in step 3.

HSIM-W6 User’s Guide 51