Cabletron Systems HSIM-W6 manual Bridging and Routing Configuration

Chapter 6: HSIM-W6 Configuration with QuickSET

Bridging and Routing Configuration

Once the initial configuration of the WAN is complete and all the necessary network information is collected, you can configure your device for bridging and/or routing. This section explains how to configure the HSIM-W6 for bridging and routing using QuickSET.

Bridging and Routing Configuration Window

The first Bridging and Routing configuration window shown in Figure 31 displays after clicking on the Next>> button at the bottom of the Wide Area (Frame Relay, PPP, or HDSL) Time Slot configuration window or the Wide Area (Sync or DDS) configuration window.

Figure 31 Bridging and Routing Configuration Window

88 HSIM-W6 User’s Guide