Cabletron Systems HSIM-W6 manual Imux, Dc Groupid Interfacenum Deletes the WAN channel

					Chapter 8: MIB Navigator
imux:
Syntax:	imux <options>
Description:	This function lets you balance your LAN traffic between two T1 WAN
	ports and is used with Point to Point Protocol (PPP). When you select
	Inverse Multiplexing via QuickSET, bridging, IP routing, and IPX
	routing functions are all disabled. The WAN device at the other end of
	the WAN link(s) must be a Cabletron Systems device, capable of
	receiving the balanced WAN traffic. The imux command with no options
	displays the status information.
Options:	-eaenables the Inverse Multiplexer Application.
	-dadisables the Inverse Multiplexer Application.
	-eg <GROUPID> enables the Inverse Multiplexer group designated by
	<GROUPID>.
	-dg <GROUPID> disables the Inverse Multiplexer group designated by
	<GROUPID>.
	-ac <GROUPID> <INTERFACENUM> Adds the WAN channel
	designated by <INTERFACENUM> to the Inverse Multiplexer group
	designated by <GROUPID>.
	-dc <GROUPID> <INTERFACENUM> Deletes the WAN channel
	designated by <INTERFACENUM> from the Inverse Multiplexer group
	designated by <GROUPID>.
	<GROUPID> A unique value identifying an element in a sequence of
	groups which belong to the WAN Inverse Multiplexer Application.
	<INTERFACENUM> The MIB II ifIndex value used to represent a
	WAN channel that has an appropriate datalink protocol associated with
	it.
Example:
		MIBNav-> imux
		WAN Inverse Multiplexer Status:
				WAN	Available BW	Xmit Byte Count
		Group ID	Channel ID	Physical Number	(Kbits/sec)	(bytes)
		------------------------------------------------------------------------------------------------------------------------------------
		1	1	1	1536000	291483387
		1	2	2	1536000	292249652
		Number of WAN Inverse Multiplexer Groups currenly programmed: 1
		Number of WAN Inverse Multiplexer Channels currenly programmed: 2
						imux

HSIM-W6 User’s Guide195