Cabletron Systems HSIM-W6 manual WAN Frame Type Configuration Window

Chapter 6: HSIM-W6 Configuration with QuickSET

To change the WAN frame type information, scroll through the list of interface entries and select the interface number you wish to modify by clicking the arrow button on the left side of the Interface # field and click the Modify... button. The WAN Frame Type window displays.

The WAN Frame Type window shown in Figure 34 allows you to select one of three frame types to be used over the WAN for each interface: Native WAN, Encapsulated Ethernet, and Encapsulated Ethernet SNAP. Select the WAN Frame Type you wish to enable by clicking the appropriate radio button. When you are done, click the OK button. The OK button returns you to the Bridging and Routing (WAN Frame Type) Configuration window.

Figure 34 WAN Frame Type Configuration Window

Once the Bridging and Routing configuration is complete, click on the Next>> button in the Bridging and Routing (WAN Frame Type) Configuration window and proceed to the Routing Configuration Window section of this guide.

HSIM-W6 User’s Guide 95