Cabletron Systems HSIM-W6 manual Troubleshooting

9 Troubleshooting

Use this chapter in conjunction with the LANVIEW status monitoring and diagnostic LEDs on the HSIM-W6 to diagnose power failures, cable faults and link problems. Figure 72 shows the front panel LEDs. Table 24 through Table 33 describes the LED states.

If you are having difficulty installing and configuring the HSIM-W6, perform the following steps:

•Review the HSIM-W6 QuickSTART Guide to insure proper installation.

•Check that all cables and connectors have been attached properly.

•Verify that power has been applied to the HSIM-W6.

WIDE AREA1

ASYNC

WIDE AREA2 HSIM-W6

LNK	LNK	LNK	CPU
STS	STS	STS
TELCO			TELCO

	Link			Status	CPU
	Status			Link	225700-LEDs
	Figure 72 HSIM-W6 Front Panel LEDs
	Table 24 HSIM-W6 Hardware LED States
LED		Color	State
		OFF	Power Off
Processor (CPU)		RED	Fault condition detected
		AMBER	Testing in progress
		GREEN	Functional

HSIM-W6 User’s Guide 197