Cabletron Systems HSIM-W6 manual Snmp Traps Screen, Trap Table Screen Fields

Chapter 7: General Configuration Using Local Management

SNMP Traps Screen

The SNMP Traps screen allows you to configure the HSIM-W6 to send traps to as many as eight remote management workstations. SNMP traps are messages about network events and device operational statistics.

Access the SNMP Traps screen from the Setup Menu screen by using the arrow keys to highlight the SNMP Traps option and press ENTER. The SNMP Traps screen, shown in Figure 56, displays.

HSIM-W6 Local Management		Flash Image Version: XX.XX.XX
	SNMP TRAPS
Trap Destination	Trap Community Name	Enable Traps

0.0.0.0

0.0.0.0

0.0.0.0

0.0.0.0

0.0.0.0

0.0.0.0

0.0.0.0

0.0.0.0

public	(NO)
public	(NO)
public	(NO)
public	(NO)
public	(NO)
public	(NO)
public	(NO)
public	(NO)

SAVE RETURN

2012_06

Figure 56 The SNMP Traps Screen

Trap Table Screen Fields

The following definitions explain each of the SNMP Traps screen fields:

Trap Destination — Use this field to enter the IP address of the management workstation designated to receive SNMP traps from the HSIM-W6.

Trap Community Name — Use this field to enter the maximum access level of SNMP traps that will be forwarded to the Trap Destination.

HSIM-W6 User’s Guide 133