Cabletron Systems HSIM-W6 IPX General Configuration Screen, IPX General Configuration Status Fields

Chapter 7: General Configuration Using Local Management

IPX General Configuration Screen

The IPX General Configuration screen allows you to configure the HSIM-W6 for IPX routing.

Access the IPX General Configuration screen by using the arrow keys to highlight the IPX General Config option and then pressing ENTER. The IPX General Configuration screen, shown in Figure 64 displays.

HSIM-W6 Local Management			Flash Image Version XX.XX.XX
		IPX General Configuration
Router Name:	IPX	Status: Enabled	UpTime: 0 days 0 hours 39 min
Version: XX.XX.XX		AdminStatusTime: 0 days 0 hours 39 min
		System Level Setup
IPX Routing: ENABLED
		Port Level Setup
Port: 1	Description: Ctron HSIM-W6 EnetPort
	MAC Address:	00-00-1D-22-46-B0	Interf. Type: ethernet-csmacd
Oper Status:	Enabled	MTU: 1500	Framing: Novell
IPX Address:
	IPX Routing: DISABLED		IPX Forwarding: DISABLED
+PORT-			SAVE	RETURN

Figure 64 The IPX General Configuration Screen

IPX General Configuration Status Fields

The following list describes each of the IPX General Configuration status fields. The status fields are for informational purposes only and cannot be modified.

Router Name — Displays the type of routing used.

Status — Displays the status of IP Routing.

UpTime — Displays the amount of time elapsed since the last time the HSIM-W6 was rebooted.

Version — The version number of the IP Routing used on the HSIM-W6.

HSIM-W6 User’s Guide 155