Cabletron Systems manual HSIM-W6 Async LED States Console Connection Only

Chapter 9: Troubleshooting

Table 25 HSIM-W6 ASYNC LED States (Console Connection Only)

LED	Color	State
		Console connection; Data Carrier
	AMBER	Detect (DCD); No Data Set Ready
		(DSR)
Status (STS)	AMBER (blinking)	Test mode
	GREEN	Modem with connection; DCD; DSR
	GREEN (blinking)	Modem, no connection; DSR; No
		DCD
	RED or GREEN	Modem connection; Request To
		Send(RTS); No Clear To Send(CTS)
Link (LNK)
	AMBER (blinking)	Traffic; Modem or console
		connection

Table 26 shows the console connection to the ASYNC port. The configuration setup for a VT100 Mode Terminal is 8 bits, No parity, 1 stop bit, and 9600 baud.

Table 26 HSIM-W6 ASYNC Console Connection Pinout

PIN	Description
1	VT Receive Data
2	VT Data Terminal Ready (DTR)
4	VT Transmit Data
5	Ground

198 HSIM-W6 User’s Guide