Cabletron Systems manual HSIM-W6 Configuration with QuickSET

Chapter 6: HSIM-W6 Configuration with QuickSET

The following section defines the field in the Wide Area PPP Time Slot configuration window.

Time Slots — A full line consists of 24 Time Slots (T1, D1) or 31 Time Slots (E1), each capable of up to 64 Kbps throughput. Using the PPP Protocol, up to 24 interfaces (T1, D1) or 31 interfaces (E1) can be assigned to the WAN link. Using the pull-down menu to the right of each Time Slot field, select the interface number that you wish to assign to the Time Slot.

NOTE

NOTE

If you are configuring a WPIM-DI Time Slot table, any available Time Slots that are not set to “0” will be mapped to the DI Interface. In other words, If you lease an entire T1 line, any Time Slots that are not used in the Time Slot configuration window are used by the device connected to the DI interface.

The interface numbers available in the pull-down menu are assigned in the WAN (T1, E1, DI) configuration window. Selecting theAdd Interface button or the Delete Interface button allows you to add or delete available interface numbers from each pull-down menu.

Once the PPP Time Slot configuration is complete, click on Next>> in the PPP Time Slot configuration window and proceed to the Bridging and Routing Configuration section.

HSIM-W6 User’s Guide 85