Cabletron Systems HSIM-W6 manual Bridge Setup Screen Fields

Chapter 7: General Configuration Using Local Management

Bridge Setup Screen

The Bridge Setup screen enables you to select a Spanning Tree protocol and enable/disable bridge ports.

Access the Bridge Setup screen, shown in Figure 58, by using the arrow keys to highlight the Bridge Setup option and pressing ENTER. The Bridge Setup screen displays.

HSIM-W6 Local Management Flash Image Version: XX.XX.XX

BRIDGE SETUP

SPANNING TREE PROTOCOL:

[IEEE 802.1]

BRIDGE PORT ADMIN STATUS:	PORT 01 --> ALL PORTS	[ENABLED]
BRIDGE PORT PAIR ADMIN STATUS:	PORT XX --> PORT [02]	[ENABLED]

SAVE BRIDGE_PORT [01] RETURN

2012_08

Figure 58 The Bridge Setup Screen

Bridge Setup Screen Fields

The following list describes each of the Bridge Setup screen fields:

Spanning Tree Protocol — Use this field to select a Spanning Tree protocol. Possible selections for this field are IEEE 802.1, DEC, or NONE.

Bridge Port Admin Status — Use this field to enable or disable individual HSIM-W6 bridge ports. Possible selections for this field are ENABLED or DISABLED.

Bridge Port Pair Admin Status — Use this field to enable or disable bridging between bridge port pairs. For example, you can enable Port 1 to bridge traffic to all ports except Port 2.

HSIM-W6 User’s Guide 139