Cabletron Systems HSIM-W6 manual Host Map Window

Chapter 6: HSIM-W6 Configuration with QuickSET

Host Map Window

The Host Map window shown in Figure 36 displays after clicking on the Host Map... button in the (IP/IPX) Routing configuration window. Host Map entries are used for IPX routing using Frame Relay Protocol only. The IPX Host Map is a database of remote IPX hosts, defined (generally) by the WAN network number and MAC address, and (more specifically) by the Interface Number and Data Link Connection Identifier (DLCI). The DLCI and Interface Number define the switched connection to the Telco Cloud. Use this window to configure IPX routing, and configure a DHCP server IP address. Enter the remote WAN MAC address and the remote Router’s WAN Network number.

Figure 36 Host Map Window

Interface # — Displays the active interface number. The interface number is a two-digit decimal number related to the Frame Relay time slot.

DLCI — Displays the Data Link Connection Identifier. Use this field to enter the DLCI, which is a four-digit decimal number corresponding to the WAN virtual circuit connection to the Telco Cloud

WAN Network # — Displays the active IPX network number of the WAN connection. Use this field to enter the WAN Network number.

98 HSIM-W6 User’s Guide