Cabletron Systems HSIM-W6 manual Wide Area 1 and 2 Configuration

Chapter 6: HSIM-W6 Configuration with QuickSET

Wide Area 1 and 2 Configuration

NOTES

When configuring the Wide Area 1 and 2 withQuickSET, the WAN configuration window that displays corresponds to the specific WPIM that is installed into the HSIM-W6.

Configuration for the Wide Area 2 port is the same as the configuration for the Wide Area 1 port.

Both Wide Area 1 and Wide Area 2 slots must be populated to proceed with Wide Area port 2 configuration.

Refer to the appropriate section listed below to configure your Wide Area 1 or 2 interface on the HSIM-W6:

Wide Area T1 Configuration Window

Wide Area E1 Configuration Window

Wide Area DI Configuration Window

Wide Area Synchronous Configuration Window

Wide Area DDS Configuration Window

Wide Area HDSL Configuration Window

66 HSIM-W6 User’s Guide