Cabletron Systems HSIM-W6 manual Dhcp, Winsaddress Domainname The Ifnum is the Ethernet

Chapter 8: MIB Navigator

dhcp:

Syntax:	dhcp <options>
Description:	The dhcp command provides a status of the Dynamic Host Configuration
	Protocol feature. Allows the user to enable/disable DHCP globally and
	by interface, and to configure interfaces with server parameters.
Options:	dhcp (with no options) Displays DHCP status information.
	dhcp enable/disable. Enables or disables the DHCP feature globally.
	dhcp <IFNUM> enable disable Enables or disables the DHCP feature
	by interface.
	dhcp reclaim <IPADDRESS> Reclaims an IP address so another client
	can use it.
	dhcp <IFNUM> <GATEWAY> <DNSADDRESS>
	<WINSADDRESS> <DOMAINNAME> The IFNUM is the Ethernet
	port number. The four configuration parameters can be passed to the
	hosts (clients). These are the IP address of their default gateway, the IP
	address of their domain name server, the IP address of their WINS
	server, and their domain name.
	dhcp <IFNUM> <NETADDRESS> <NETMASK>
	<LOWADDRESS> <HIGHADDRESS> <LEASE> Allows the user
	to specify the lease period for the hosts (clients), from one hour to many
	years. Selectable on a per port basis only.
	<IFNUM> The Ethernet port number.
	<NETADDRESS> The IP network on which the hosts will reside.
	<NETMASK> The subnet mask for the hosts.
	<LOWADDRESS> The lowest numerical value of the IP range to be
	allocated.
	<HIGHADDRESS> The highest numerical value of the IP range.

184 HSIM-W6 User’s Guide