Cabletron Systems HSIM-W6 manual IP Configuration Screen Fields

Chapter 7: General Configuration Using Local Management

IP Configuration Screen

The IP Configuration screen enables you to access the IP General Config and IP RIP screens to configure the HSIM-W6 for IP Routing and enable RIP on the HSIM-W6.

Access the IP Configuration screen, shown in Figure 60, by using the arrow keys to highlight the IP option on the Router Setup screen and then pressing ENTER. The IP Configuration screen displays.

HSIM-W6 Local Management Flash Image Version XX.XX.XX

IP CONFIGURATION

IP General Config

IP RIP

RETURN

2012_09

Figure 60 IP Configuration Screen

IP Configuration Screen Fields

The following list describes each of the IP Configuration Screen fields.

IP General Config — Use this field to access the IP General Config screen and configure the HSIM-W6 for IP routing.

IP RIP — Use this field to access the IP RIP screen and enable Routing Information Protocol (RIP) routing on the HSIM-W6.

HSIM-W6 User’s Guide 143