Cabletron Systems HSIM-W6 manual Hdsl Transmit Clock Source Slave or Master

Chapter 6: HSIM-W6 Configuration with QuickSET

The line configuration information shown in Table 18 must be supplied by your wiring provider. The HSIM-W6 factory default setting is in bold.

Table 18 Telco Configuration Information

Configuration Information Required by User

Configuration Information Supplied by Service Provider

HDSL Transmit Clock Source

Slave or Master

This section describes the fields in the Wide Area HDSL configuration window.

HDSL Transmit Clock Source — Displays the HDSL transmit clock source. The selections for this field are either Slave or Master. The default setting for this field is Slave.

Protocol — Displays the active protocol for the HDSL WAN port. The selections for this field are either HDLC or PPP. The default setting for this field is PPP.

Once Wide Area HDSL configuration is complete, click on the Next>> button and go Wide Area HDSL Time Slot Configuration Window section.

HSIM-W6 User’s Guide 81