Cabletron Systems HSIM-W6 manual Interface Cable Part Numbers, Connector Pin Assignments

A WPIM Cable Specifications

NOTE

For all WPIM cables, there is part number information for ordering a standard 20-foot cable or a specified length of cable. The number 20 followed by the part number denotes the standard 20-foot cable. The letter “L” denotes the specified length required in feet or meters. For example: 9372095-3 denotes a 3 foot cable; 9372095-3M denotes a 3-meter cable.

WPIM-T1

This section provides the Cabletron Systems part number and connector specifications for WPIM-T1 interface cables.

Table 34 provides connector type and part number information.

Table 34 T-1 Interface Cable Part Numbers

Connector Type

Part Number

RJ48C

9372094

Table 35 provides RJ48 connector pin assignments.

Table 35 T-1 Connector Pin Assignments

Pin	Signal
1	Receive Ring
2	Receive Tip
3	Not Used
4	Transmit Ring
5	Transmit Tip
6	Not Used
7	Shield Ground
8	Shield Ground

HSIM-W6 User’s Guide 209