Chapter 7: General Configuration Using Local Management

3.Repeat steps 1 and 2 until the Main Menu screen displays.

4.Use the arrow keys to highlight the EXIT command at the bottom of the Main Menu screen.

5.Press ENTER. The HSIM-W6Local Management Password screen displays and the Local Management session ends.

Local Management Screen Hierarchy

Local Management consists of a series of menu screens that provide a path to each of the Local Management function screens. Navigate through Local Management by selecting items from the menu screens. Figure 50 shows the hierarchy of the Local Management screens.

Password Main Menu

Setup Menu

MIB Navigator

System Level

SNMP Community Names

SNMP Traps

Flash Download

Bridge Setup

Router Select

WAN Setup

IP

IPX

IP Configuration

IP RIP

IPX Configuration

IPX RIP

IPX SAP

Figure 50 Hierarchy of Local Management Screens

Accessing Local Management

This section explains how to access and use the Local Management menu screens. Menu screens provide a path to the setup screens and status screens.

Establishing a TELNET Connection

The HSIM-W6 is shipped with a temporary IP address of 192.168.254.254 so that your computer can communicate with it over your Local Area Network (LAN) through a TELNET connection. However, to establish a TELNET connection, your computer must be on the same subnet as the HSIM-W6. Cabletron Systems recommends that you assign a temporary IP address of 192.168.254.253 to your computer to ensure that both devices are on the same subnet. TELNET connections to the host device require the community name passwords assigned at the SNMP Community Names screen or if you are doing an initial configuration, use the default password public. Refer to the SNMP Community Names section of this manual for additional information about community names.

HSIM-W6 User’s Guide 121

Page 135
Image 135
Cabletron Systems HSIM-W6 Accessing Local Management, Local Management Screen Hierarchy, Establishing a Telnet Connection