Cabletron Systems HSIM-W6 manual Bridge, Circuitmap

	Chapter 8: MIB Navigator
bridge:
Syntax:	bridge <ENABLE/DISABLE> <IFNUM/ALL>
Description:	Allows management of bridging upon one or more interfaces of the
	device. Bridging may be enabled or disabled at your request, either one
	at a time or all at once. Specifying a single interface number affects the
	bridging status of that interface, while specifying ALL affects every
	interface of the device.
Options:	<ENABLE/DISABLE> Enables or disables bridging.
	<IFNUM/ALL> Allows you to specify an interface number.
Example:
		MIBNav->bridge disable all
		bridge enable 1
		bridge disable 1
		bridge
circuitmap:
Syntax:	circuitmap -a <PROTOCOL>
	circuitmap -f <PROTOCOL>
	circuitmap -d <PROTOCOL> <INTERFACENUM>
	<NETADDRESS> <MACADDRESS>
	circuitmap -s <PROTOCOL> <INTERFACENUM>
	<NETADDRESS> <MACADDRESS> <CIRCUIT>
Description:	Allows the user to view and/or modify a Protocol’s Circuit Map (i.e.,
	address-to-circuit) table for the device. The -a option shows the user the
	current HostMap information for the device. The -d option allows the
	user to delete an entry from the table. The -s option allows the user to
	insert a static entry into the table. The -f option allows the user to flush
	the table. The device must be initialized after changing the Circuit Map.
Options:	Not Applicable

HSIM-W6 User’s Guide191