16
7.1 How to Replace Internal Batteries
Use the following steps to replace the internal batteries:
1. Using caution not to put stress on the LCD display cable, pull
the top of the front panel forward. Release the spring latches at
the bottom of the front panel and remove it, placing it to the
side of the UPS.
2. Unscrew the metal battery
cover (2000VAmodel
shown).
3. Pull the battery out onto a flat, stable surface (2000VA
model shown)
4. Remove the old battery. See “Recycling the Used
Battery” for proper disposal.
5. Install the new battery.
6. Reinstall the metal battery cover and front panel.
7.2 Recycling the Used Battery
Contact your local recycling or hazardous waste centre for information on proper disposal of the
used battery.
WARNING
• Do not dispose of the battery or batteries in a fire. Batteries may explode. Proper dispos-
al of batteries is required. Refer to the local codes for disposal requirements.
• Do not open or mutilate the battery or batteries. Released electrolyte is harmful to the
skin and eyes. It may be toxic.
CAUTION
Do not discard the UPS or the UPS batteries in the trash. This product contains sealed lead-acid
batteries and must be disposed of properly. For more information, contact your local recycling or
hazardous waste centre.