38 AMX Switch Series Installer/User Guide
Figure 3.4: Configure Screen
3. Select Quick Switch.
4. To save changes, click Apply. To exit the OSCAR interface, click Cancel or X.
NOTE: Quick switch hotkeys only work if there is an existing connection and the OSCAR interface is
not activated.
Setting a local switch hotkey
A local switch hotkey allows you to force a connection to the local server by typing Alt+2.
Figure 3.5: Configure Screen
To enable the local swit ch ho tk e y:
1. Press Ctrl+Ctrl to launch the OSCAR interface.
2. Click the Console tab, then click the down arrow button to display the Confi gure screen.
3. Select Local Switch.
4. To save changes, click Apply. To exit the OSCAR interface, click Cancel or X.
NOTE: The local switch hotkey will not force a connection if two local servers are attached to the user station or
if the OSCAR interface is open when the hotkey is entered.
AMX.book Page 38 Thursday, June 12, 2008 4:14 PM