50AMX Switch Series Installer/User Guide
Keyboard type
If you connected a PS/2, USB or Devlin Vizrt keyboard to the user station, you will not have to change the keyboard type. If you connected a Pinnacle FAK or Chyron Duet keyboard to the user station, complete the following steps to set the keyboard type.
To set the keyboard type on the user station:
1.Press Ctrl+Ctrl to launch the OSCAR interface.
2.Click the Console tab, then click the down arrow button to display the Configure screen.
3.The Type field displays the current keyboard type. The Type field changes to PS/2 Type if your AMX switching system includes an AMX 5130 user station.
The Type or PS/2 Type field is activated if your AMX switching system includes an AMX 5120/AMX 5130 user station connected to a PS/2 keyboard. The Type or PS/2 Type field is deactivated in the following cases:
•Your system includes an AMX 5100 or AMX 5110 user station and is connected to a PS/2 keyboard. In this case, Standard is displayed in the Type field.
•Your system includes any version of the AMX user station and is connected to a Sun keyboard. In this case, Sun is displayed in the Type field.
If the Type or PS/2 Type field is activated, select Standard, Pinnacle FAK or Chyron. The change will be highlighted in blue text.
Figure 3.18: Console Screen
NOTE: Standard refers to any keyboard. If your AMX 5130 user station is connected to a Pinnacle FAK or Chyron Duet keyboard, you must select Pinnacle FAK or Chyron Duet in the PS/2 Type field to enable support for this keyboard. If your AMX switching system has connections to both PS/2 and USB keyboards, the USB keyboard takes precedence when both keyboards are used simultaneously.
Select the appropriate keyboard type from the Type
4.Click Apply to save changes.
