
88AMX Switch Series Installer/User Guide
To use History mode:
1.Press
2.Press each key to perform the action described in the following table.
Table 1.10: History Mode Control Keys
History Mode | Action |
|
|
Home | Move to the top of the buffer. |
|
|
End | Move to the bottom of the buffer. |
|
|
Page Up | Move up one buffer page. |
|
|
Page Down | Move down one buffer page. |
|
|
Up Arrow | Move up one buffer line. |
|
|
Down Arrow | Move down one buffer line. |
|
|
| Enters Configuration mode. The Configuration Screen will display. Press |
| return to the previous screen with History mode enabled or |
| previous screen with |
|
|
| Clears the history buffer. If you choose this option, a warning screen will appear. |
| Press Enter to delete the history buffer or Esc to cancel the action. The previous |
| screen will redisplay. |
|
|
3.When finished, press
AMIQ-SRL module pinouts
The AMIQ-SRL module pinouts are provided in the following table.
Table 1.11:
Host Signal | Signal Flow | SRL Signal Name/Description | ||
Name/Description | ||||
|
|
| ||
|
|
|
| |
1 | DCD- Data Carrier Detect | Out of SRL | DTR - Data Terminal Ready | |
|
|
|
| |
2 | RXD - Receive Data | Out of SRL | TXD - Transmit Data | |
|
|
|
| |
3 | TXD - Transmit Data | In to SRL | RXD - Receive Data | |
|
|
|
| |
4 | DTR - Data Terminal Ready | In to SRL | DSR - Data Set Ready | |
|
|
|
| |
5 | GND - Signal Ground | N/A | GND - Signal Ground | |
|
|
|
| |
6 | DSR - Data Set Ready | Out of SRL | DTR - Data Terminal Ready | |
|
|
|
| |
7 | RTS - Request to Send | In to SRL | CTS - Clear to Send | |
|
|
|
|