Chapter 3: Operations | 63 |
|
|
To reset the keyboard and mouse:
1.Press the default Command Line hotkey sequence to display the Command Line.
2.Type rk and press Enter to reset the keyboard. - or -
Type rm and press Enter to reset the mouse.
Disabling Auto User Login
Auto User Login at the user station can only be enabled by the Administrator, but it can be disabled by any user.
To disable auto user login:
1.Press the default Command Line hotkey sequence to display the Command Line.
2.Type disable auto user login and press Enter.
See Locking user station settings on page 56 for more information about Auto User Login settings.
Equalization tuning
To adjust the video quality of the monitor connected to your user station, you may manually tune the equalization values that are applied during video compensation.
To edit equalization offset values:
1.Press the default Command Line hotkey sequence to display the Command Line.
2.Type equalization tuning and press Enter. The Equalization Tuning screen will be displayed.
Figure 3.31: Equalization Tuning Screen
3.Select Enable to allow manual adjustment of equalization offset values.
4.Select the color(s) you wish to adjust. You may adjust colors individually or as a group.
5.To increase the offset value of the selected color(s) by increments of one, use the Up key or
Plus key.
To decrease the offset value of the selected color(s) by increments of minus one, use the Down key or Minus key.
