36AMX Switch Series Installer/User Guide
To select a target device:
1.Press Ctrl+Ctrl to launch the OSCAR interface.
2.Click the Target tab.
3.Select an access mode: Shared, Private, or Maintain. You can also select Scan to scan the switching system. See Scanning the switching system on page 41 for more information.
4.
Click the target device name and then click the Start button.
NOTE: Target devices shown in green may be accessed by the user through two redundant paths.
5.To disconnect from a selected target device, launch the OSCAR interface and click the Clear button or switch to another target device.
Setting a target device hotkey
You can quickly access target devices by using hotkey sequences. In Figure 3.2, a hotkey sequence of Ctrl+F1 is set for a target device named “aSystemServer1.” Whenever Ctrl+F1 is pressed, the system will automatically switch to the designated target device.
To set or change a target device hotkey:
1.Press Ctrl+Ctrl to launch the OSCAR interface.
2.Click the User tab. The User screen displays.
3.Click the down arrow button twice or Ctrl + page end to display the Server Hotkey screen.
Figure 3.2: Server Hotkey Screen
4.Type the name of the target device for which you wish to set or change the associated hotkey. A list of target devices displays.
To sort the target device list by name, click Name. To sort the target device list by hotkey, click Hotkey.
