Chapter 2: Installation | 31 |
|
|
Figure 2.16: AMX User Station Back Panel (AMX 5111 User Station Shown)
•Activity status LED – The yellow LEDs blinks when the link connection is active and data is being transferred and are not lit when the link connection is inactive.
•Connection status LED – The green LED is illuminated when the port is connected.
IQ module
The IQ modules have green LEDs indicating power and link status.
Link/ACT
LEDs
Power LED
Figure 2.17: IQ Modules with LEDs (AMIQDM Module Shown)
•Power LED – The green Power LED is illuminated when power is connected. If the AMIQ- SRL module loses power, the serial interface will not generate a serial break to the attached device.
•Link/ACT LEDs – A green Link/ACT LED is illuminated when the attached server is powered, and a valid UTP connection has been made to an AMX switch. Link/ACT LEDs blink while the module is being upgraded or when a fault has been detected.
NOTE: Some
