Standing time or cooking automatically after defrosting
For best results, allow the food to stand for a while after defrosting. This helps equalize the temperature of the food to provide more even defrosting.
When COOK 1follows QUICK DEFROST,the oven automatically provides a standing time equal to the time touched in for QUICK DEFROST.COOK 1 will begin after the automatic standing time.
For cooking automatically atter defrosting:
1.Touch QUICK DEFROST and desired time.
2.Touch COOK 1.
3.Touch numbers for desired cooking time.
4.Touch COOK POWER. (If you want to cook at high power, skip to step 6.)
5.Touch a number for desired Cook Power,
6.Touch START.
For a different standing time:
1.Touch QUICK DEFROST and desired time.
2.Touch COOK 2.
3.Touch numbers for desired standing time.
4.Touch COOK POWER.
5.Touch “0”for zero Cook Power.
6.Touch START.
When QUICK DEFROST is over, the oven will shut off. If Cook 1 has not been
programmed, 3 beeps will sound and the Display will count down the time for Cook 2 at zero Cook Power. If Cook 1 had not been programmed, the Display will count down and sound 2 beeps before Cook 1will start. “End” will show on the Display and 4 beeps will sound when the standing time and cooking time is over.
About the “QUICKDEFROST” Cycle
The microwave oven automatically divides the time set for the QUICK DEFROST Cycle into three equal parts:
- First part |
| 80% | of full | Cook | Power; | |
part | . | 50% | of full Cook | Power; | ||
part |
| 20% | of full | Cook | Power; | |
This automatic | food quickly | and |
| |||
completely. |
|
|
|
|
|
Changing or adding defrost time
You can change the defrosting time any time before or after touching START.
Any new time setting made while QUICK DEFROST is operating will continue the defrosting at only 20% of full power.
The best time to change the setting is near the end of the QUICK DEFROST Cycle.
-Open the door.
-Check the food with
-fEes;et;e door and touch STARTto continue the cycle if no additional time is
OR...
12