The electronic clock/oven control
Display/clock
l When you first plug in the range, the last time of day set will flash on the display. If, after you set the clock (page 9), the display again shows the last time of day set, your electricity was off for a while. Reset the clock.
l When you are not using the oven, this is an accurate clock.
l When using the oven or Minute Timer, the display will show the time, temperature settings and what command pads have been pressed.
l When showing the time of day, the display will show hours and minutes. l When using the Minute Timer, the
display will show minutes and seconds in the following sequence:
-For settings from
-For settings from
-For settings from
-For settings from
-For settings from 2
50 minutes, the display will increase in
-When using Cook Time and/or Stop Time, the display will show hours and minutes.
Command pads
The command pads tell the oven what to do and in what order. A few examples:
set the clock.
Each command pad (except Off/Clear) has its own indicator. The indicator comes on when you touch the command pad.
Set knob
Once you’ve pushed a command pad to tell the oven what you want it to do, you’ll use the Set Knob to set a temperature or time. Turning the Set Knob clockwise increases the number on the display. Turning the Set Knob counterclockwise decreases the number on the display.
8