Whirlpool RB276PXV, RB275PXV manual Setting the Controls

Setting the Controls

Be sun? the kitchen is ventilated during the Self-Cleaning cycle. This will help normal smoke and heat to disappear from the room as quickly as possible.

1.Set the Upper Oven Selector and Upper Oven Temperature Control on CLEAN. The Upper Oven “on” Signal Light will come on.

3.Push in and release the Self-Clean Button. A 3-hour Self-Cleanrng cycle will be set automatically.

The Display will count down the time in minutes. The Auto Oven Symbol, Self-Clean and “heating” Signal Lights will come on.

If a cleaning cycle other than 3 hours is desired, push in and hold the Bake Hours Button and turn the Set Knob to the new time up to 4 hours.

l Use 2 hours for light soil.

l Use 3-4 hours for moderate to heavy soil.

2.Lift the panel between the oven door and the control panel. Move the Lock Lever all the way to the right.

4.The “locked” Signal Light will come on when the upper oven temperature exceeds normal baking temperatures. The Lock Lever must not be moved and the door can’t be opened when the light is on. if you want to see Stop Time of the Self-Cleaning cycle, push the Stop Time Button. Push the Self-Clean Button to see cleaning time again.

NOTE: The Bake Hours and Stop Time Signal lights will flash during the entire Self-Cleaning cycle.

5.After the cleaning cycle is com- pleted, the Auto Oven Symbol

and Self-Clean Signal Light will go off. The Display will show the time of day. When the “locked” Signal Light goes off, move the Lock Lever back to the left. Do not force it. Wait until it will move easily.

continued on next page 19