Caring for your oven
Control Panel and Knobs
Burn and Electrical Shock Hazard
Make sure all controls are OFF and the oven is cool before cleaning. Failure to do so can result In burns or electrical shock.
1.Pull knobs straight off.
2.Use warm soapy water and a soft cloth, or spray glass cleaner, to wipe the control panel. Rinse and wipe dry.
3.Wash control knobs in warm soapy water. Rinse well and dry. Do not soak.
4.Push control knobs straight back on. Make sure they point to OFF.
The Oven Door
Removing the oven door will help make it easier to clean the oven.
To remove:
1.Open the door and rotate the Broil Stop clips over the door hinge slots.
2.Close the door to the Broil Stop position.
3.Hold the door at both sides. Tip in the top of the door while lifting slightly, then pull door straight out.
To replace:
1.Fit the door hinges into corner slots on the oven frame.
2.Push the hinges straight in while lifting the door slightly.
3.When hinges snap into place,
open the door and rotate the Broil Stop clips to uncover the door hinge slots. Close the door.
12
