ELECTRONIC OVEN CONTROL
AB C DEF G
H | I | J | K | L | M | N | O |
| A. Auto clean | F. Clock |
|
|
| K. Timed cooking |
|
| B. Upper oven temperature display | G. Oven light |
|
|
| L. Hour |
|
| C. Electronic display | H. Oven selector |
|
|
| M. Minute |
|
| D. Lower oven temperature display | I. Oven settings |
|
|
| N. Start (control lock) |
|
| E. Timer | J. Temperature setting |
|
| O. Upper off/cancel |
| |
|
|
|
|
|
| Lower off/cancel |
|
Display
When power is first supplied to the appliance, everything on both displays will light up for 5 seconds. Then, the time of day and “PF” will appear on the electronic oven display.
If “PF” appears at any other time, a power failure has occurred. To reset the clock, press UPPER OFF/CANCEL or LOWER OFF/ CANCEL on double oven models. On single oven models, press
OFF/CANCEL.
Electronic Display
When the oven(s) are in use, this display shows the oven temperature. On double oven models, this display will also show which oven is being set. The left cavity symbol in the oven display represents the upper oven, and the right cavity symbol in the oven display represents the lower oven.
If “Err” appears on the oven display, an invalid pad was pressed. Press UPPER OFF/CANCEL or LOWER OFF/CANCEL and retry entry. On single oven models, press OFF/CANCEL.
When the oven(s) are not in use, the display will show the time of day.
Start
The Start pad begins any oven function except the Timer. If the Start pad is not pressed within 5 seconds after pressing a pad, “START?” will appear on the oven display as a reminder. If the Start pad is not pressed within 4 minutes after pressing a pad, the oven display will return to the time of day mode and the programmed function will be canceled.
UpperOff/Cancel,LowerOff/Cancel orOff/Cancel
The UPPER OFF/CANCEL, LOWER OFF/CANCEL and OFF/CANCEL pads stop their respective oven functions except for the Clock, Timer and Control Lock.
The cooling fan may continue to operate even after an oven function has been canceled, depending on the oven temperature.
Clock
This is a
To Set:
Before setting, make sure the ovens, Timer and Timed Cooking are off.
1.Press CLOCK.
2.Press the HOUR or MIN “+” or
3.Press CLOCK or START.
To remove the time of day from the display: Press and hold CLOCK for 5 seconds. Repeat to return the time of day to the display. The time should not have to be reset.
Tones
Tones are audible signals, indicating the following:
One tone
■Valid pad press
■Oven is preheated
■Function has been entered
Three tones
■Invalid pad press
Four tones
■End of cycle
■Reminder, repeating each minute after the
4
