Bakeware

The bakeware material affects cooking results. Follow manufacturer’s recommendations and use the bakeware size recommended in the recipe. Use the following chart as a guide.

BAKEWARE/

RECOMMENDATIONS

RESULTS

 

 

 

Light colored

Use temperature and time

aluminum

recommended in recipe.

Light golden crusts

Even browning

Meat Thermometer

On models without a temperature probe, use a meat thermometer to determine doneness of meat, poultry and fish. The internal temperature, not appearance, should be used to determine doneness. A meat thermometer is not supplied with this appliance.

Insert the thermometer into the center of the thickest portion of the meat or inner thigh or breast of poultry. The tip of the thermometer should not touch fat, bone or gristle.

After reading the thermometer once, push it into the meat ½" (1.3 cm) more and read again. If the temperature drops, cook the meat or poultry longer.

Check all meat, poultry and fish in 2 or 3 different places.

Dark aluminum and other bakeware with dark, dull and/or nonstick finish

Brown, crisp crusts

May need to reduce baking temperatures 25°F (15°C).

Use suggested baking time.

For pies, breads and casseroles, use temperature recommended in recipe.

Place rack in center of oven.

Oven Vent

A

Insulated cookie

Place in the bottom third of oven.

sheets or baking

May need to increase baking time.

pans

 

 

Little or no bottom browning

Stainless steel

May need to increase baking time.

Light, golden crusts

Uneven browning

Stoneware/Baking

Follow manufacturer’s

stone

instructions.

Crisp crusts

 

 

 

Ovenproof

May need to reduce baking

glassware, ceramic

temperatures 25°F (15°C).

glass or ceramic

 

Brown, crisp

 

 

crusts

 

 

 

 

A. Oven vent

The oven vent releases hot air and moisture from the oven, and should not be blocked or covered. Blocking or covering vent will cause poor air circulation, affecting cooking and cleaning results. Do not set plastics, paper or other items that could melt or burn near the oven vent.

The element can be used when the oven is in use as long as the cookware does not extend more than ¹⁄₂" (1.3 cm) over the element.

Baking and Roasting

Before baking and roasting, position the racks according to the “Positioning Racks and Bakeware” section. When roasting, it is not necessary to wait for the oven to preheat before putting food in, unless recommended in the recipe.

To Bake or Roast:

1.Push in and turn the oven control knob to the desired temperature setting. The OVEN ON and OVEN HEATING lights will turn on, and the set temperature will appear in the display for 5 seconds.

On some models, set the oven selector to BAKE and turn the oven temperature control knob to the desired temperature setting. The OVEN ON indicator light will turn on and will turn off once the oven is preheated.

2.Place food in oven.

The bake and roasting elements will turn on and off to keep the oven temperature at the setting. The OVEN ON indicator light(s) will turn on and off with the elements.

3.Push in and turn oven control knob to OFF when finished.

On some models, turn both the oven selector and oven temperature control knob to OFF. The OVEN ON indicator light will turn off.

9

Page 9
Image 9
Whirlpool RF3020XKQ4 manual Meat Thermometer, Oven Vent, Baking and Roasting, Bakeware Recommendations Results