Troubleshooting

Ifyour

UBC245XLT

isnotperformingproperly,trythe

following steps.

Problem Suggestion
Scannerwon’t work. 1. Checkthe connections at both ends of
theAC Adapter.
2. Turnon the wall switch of your room. You could
beusing an outlet controlled by the wall switch.
3. Movethe AC Adapter to another wall
outletor replace the battery pack.
Improperreception. 1. Check the antenna connection or move
andreposition the antenna.
2. Movethe scanner.
3. Youmay be in a remote area which could require
anoptional multi-band antenna.
Checkwith your dealer or local electronics store.
Scanwon’t stop. 1. Adjustsquelch threshold - refer to page 14,
Settingthe Squelch.
2. Checkthe antenna connection.
3. Checkto see if many of the channels are locked
out.If so, the scanner has less chance of finding
anactive channel.
4. Revieweach channel’s frequency to see if it is still
storedin memory and is correct.
5. It’spossible that none of the programmed
frequenciesare currently active.
Scanwon’t start. 1. Pressthe keyagain.
2. Adjustthe SQUELCH control.
3. Checkto see if all channels are locked
out.

76