Programming
Before the UBC245XLT can begin conventional scanning, you must program a frequency into at least one channel. Repeat this procedure for each channel you want to program.
1.Select frequencies from your dealer, from various sources.
Here’s a list of sample frequencies you should try.
| 476.425 MHz | UHF CB CH1 | |
| 476.450 MHz | UHF CB CH2 | |
| 476.475 MHz | UHF CB CH3 | |
| 476.500 MHz | UHF CB CH4 | |
2. | Press . |
|
|
3. | Select a channel. |
|
|
|
| ||
a. Enter the channel number.
b. Then press 
.
1 2 3 4 5 6 7 8 9 10
16
