Uniden UBC 245XLT manual You will hear two

The first step in tracking a trunked system is storing the
frequencies in one of the 10 available banks in
your scanner.
1. Press	for 1.5
second.
You will hear two
beeps, and BANK and
TRUNK will begin to
flash in the display.

2.Select the Bank you want to store the frequency, by pressing 1 through 0.

3.Choose the system you want to track.

Use or

to choose the system, and press .

List of trunking options as follows:
E2	800	(Type II 800 MHz)
E2	900	(Type II 900 MHz)	MHz) *
E2	Hi	(Type II VHF 137-174
E2	UHF	(Type II UHF 406-512 MHz) *
Ed		(EDACSÆ)***
E1		(Type I 800 MHz) **

*Requires programming of a base and an offset frequency. See appropriate section.

** Requires programming of a fleet map. See section on Programming a Fleet Map.

*** Requires programming of frequencies in exact order and location.

40