Uniden UBC 245XLT manual Then the indicators represent multiple channels

Each frequency you program in a trunking bank
corresponds to an activity indicator at the top of your
scanner’s display. The way in which the Activity Indicators
display provide you with information about the system
you’ren	tracking.
	The indicator which
	remains on, even if
	when there is no
	traffic, represents the
	frequency being used
n	as the data channel.
	If an indicator turns on
	and you don’t hear a
	conversation, then the
	channel is probably
	being used for a
	telephone
	interconnect call or a
	private call. These
	calls are not
	monitored by your
	scanner.
Note: The Scanner does not show activity bars for
	private or phone interconnect calls for
n	EDACSÆsystems.
	The indicator which
	flashes when an ID
	displays represents
	the frequency being
	used by the talk
n	group.
	If you’re holding on an
	ID which isn’t active,
	the activity indicators
	will turn on and off as
	other groups use the
	system.
Note: If more than 20 channels are stored in a bank,
	then the indicators represent multiple channels.
	For example, if 28 channels are programmed, the
	first 8 activity indicators each represent two
n	channels.
	The display may change from showing channel
	activity indicators to Scan List memory positions.
	To restore to the previous setting, press	.

47