Uniden UBC 245XLT manual Setup, Installing the Battery Pack

Setup

These are helpful guidelines when using your new scanner:

■If your scanner receives interference or electrical noise, move the scanner or its antenna away from the source.

■If you need to improve reception, use an optional antenna designed for multi-band coverage. (You can purchase this type of antenna at a local electronics store.)

■Use the included earphone or an optional stereo headset with proper impedance for private listening. Read the precautions on the inside front cover of this Guide.

Installing the Battery Pack

1. Open the cover.

10 BAND COVERAGE UBC235XLT

66-88 MHz	12.5 kHz	VHF Low Band
108-137 MHz	12.5 kHz	Aircraft Band
137-144 MHz	5 kHz	Land Mobile
144-148 MHz	5 kHz	2 Meter Ham
148-174 MHz	12.5 kHz	VHF High Band
406-420 MHz	12.5 kHz	Land Mobile
420-450 MHz	12.5 kHz	70cm Ham
450-470 MHz	12.5 kHz	UHF Band
470-512 MHz	12.5 kHz	Land Mobile
806-956 MHz	12.5 kHz	“800” Band

2. Insert the battery pack.

3. Replace cover and press down until it clicks into place.

10 BAND COVERAGE UBC235XLT

66-88 MHz	12.5 kHz	VHF Low Band
108-137 MHz	12.5 kHz	Aircraft Band
137-144 MHz	5 kHz	Land Mobile
144-148 MHz	5 kHz	2 Meter Ham
148-174 MHz	12.5 kHz	VHF High Band
406-420 MHz	12.5 kHz	Land Mobile
420-450 MHz	12.5 kHz	70cm Ham
450-470 MHz	12.5 kHz	UHF Band
470-512 MHz	12.5 kHz	Land Mobile
806-956 MHz	12.5 kHz	“800” Band

11