Installing the Seat and Attachments

The illustrations on the following pages show how to install the seat and each of the Bowflex Revolution® XP attachments.

Seat and Back Pad with Locking Pin

Attach the seat and back pad to the seat rail by placing the upper hooks onto the respective upper posts and rotating the lower hooks into position.

Once the pads are in position, insert the locking pin through the hole behind the lower hook to secure the pad:

•Use the locking pin to secure the seat pad for the Standing Single Leg Curl exercise.

•Use the locking pin to secure the back pad when you are performing seated lat pulldowns.

Note: Do not use the locking pin on the back pad when it is in the angled position.

Upper Hook

Back Pad

Locking Pin

Upper Hook

Locking Pin

Upper Post