Whirlpool RF303BXP manual Using the surface units, Surface Unit Indicators, Signal light

OVEN TEMPERATUREOVEN

CONTROLSELECTOR

OVEN SIGNAL	RIGHT REAR	RIGHT FROiT
LIGHT	CONTROL KNOB	CONTROL KNOB

Using the surface units

before turning them to a setting. They can be set anywhere between HI and OFF.

Surface Unit Indicators

The solid dot in the surface unit indicator shows which surface unit is turned on by that knob.

Signal light

One of the signal lights will glow when a surface unit is on.

Until you get used to the settings, use the following as a guide. For best results, start cooking at the high settings; then turn the control knob down to continue cooking.

Use HI to start		Use MED-HI			Use	MD		Use MED-LO
foods	cook-	to	hold	a	for gravy,			to keep	food
ing; to	bring	rapid		boil; to	puddings			cooking	after
yo;ids	to a	fry	chicken		and	icing;	to	starting	it
		or	pancakes.		cook	large		on a higher
					amounts		of	setting.
					vegetables.

CAUTION: The use of the HI setting for long periods of time can damage surface units and discolor chrome reflector bowls. Start cooking on HI and turn control down to con- tlnue cooking.

I

Use LO to keep food warm until ready to serve. Set the heat higher or lower within the LO band to keep food at the temperature you want.

5