Whirlpool RF335EXP manual Using the surface units, Surface Unit Indicators, Signal light

II I

OVEN TEMPERATURE	OVEN SIGNAL	OVEN	Rl6HT FRONT
CONTROL	LIGHT	SELECTOR	CONTROL KNOB	I

Using the surface units

Control knobs must be pushed in before turning them to a setting. They can be set anywhere between HI and OFF.

Surface Unit Indicators

The solid dot in the surface unit indicator shows which surface unit is turned on by that knob.

Signal light

One of the signal lights will glow when a surface unit is on.

Until you get used to the settings, use the following as a guide. For best results, start cooking at the high settings; then turn the control knob down to continue

cooking. -

Use HI to start		Use MED-HI
foods	cook-	to	hold	a
ing; to	bring	rapid		boil; to
liquids	to a	fry	chicken
boil.		or	pancakes.

Use MED			Use MED-LO
for gravy,			to keep	food
puddings			cooking	after
and	icing;	to	starting	it
cook	large		on a higher
amounts		of	setting.
vegetables.

Use LO to keep food warm until ready to serve. Set the heat higher or lower within the LO

CAUTION: The use of the HI selilng for long periods of lime can damage surface units and discolor chrome reflector bowls. Start cooklng on HI and lum control down to con- tlnue cooklng.

band to keep food at the temperature you want.