Replacing
3.Hold the surface unit as level as possible with the terminal just started into the receptacle.
2.Line up opening in the reflector bowl with the surface unit receptacle.
4.Push the surface unit terminal into the receptacle. When the terminal is pushed into the receptacle as far as it will go, the surface unit will fit into the reflector bowl.
CAUTION: Reflector bowls reflect heat back to the utensils on the surface unlts. They also help catch spills. When they are kept clean, they refleot heat better and look new longer.
If a reflector bowl gets dlsoolored, some of the utensils may not be flat enough, or some may be too large for the surface unit. In either Case, some of the heat that’s meant to go Into or around a ulensll goes down and heats the reflector bowl. This extra heat can discolor R.See “Cooklng Qulde” for furlher Information.
