OVEN LIGHT SWITCH | OVEN SELECTOR | SURFACEUNIT INDICATORS |
Using the surface units
Surface Unit Indicators
The solid dot in the surface unit indicator shows which surface unit is turned on by that knob.
Signal Light
One of the signal lights will glow when a surface unit is on.
Control knobs must be pushed in before turning them to a setting. They can be set anywhere between HI and OFF.
Until you get used to the settings, use the following as a guide. For best results, start cooking at the high settings; then turn the control knob down to continue
cooking. -
Use | HI to start | Use | Use MED | Use | ||||
foods | cook- | to hold | a | for gravy, | to keep | food | ||
ing; | to bring | rapid | boil; to | puddings | cooking | after | ||
liquids | to a | fry chicken | and | icing; to | starting | it | ||
boil. |
|
| or pancakes. | cook | large | on a higher | ||
|
|
|
|
| amounts of | setting. |
| |
|
|
|
|
| veaetables. |
|
|
CAUTION: The use of the HI sefflng for long periods of time
can damage surface units and discolor ohrome reflector |
|
bowls. Start cooklng on HI and turn control down to con- |
|
tfnue cooklng. | I |
|
Use LO to keep food warm until ready to serve. Set the heat higher or lower within the LO band to keep food at the temperature
you want.
5