3. Hold the surface unit as level as possible with
the terminal just started into the receptade.
Push the surface unit terminal into the
receptacle.
4. When terminal is pushed into the receptade
as far as it will go, push down the edge of the
surface unit opposite the receptacle. The
element hokfdown clip will keep the surface
unit from moving around.
NOTE: Reflector bowls reflect heat back to the
utensils on the surface units. They also help
catch spills. When they are kept clean, they
reflect heat better and look new longer.
ff a reflector bowl gets discolored, some of the
utensils may not be flat enough, or some may be
too large for the surface unit. In either case,
some of the heat that’s meant to go into or
around a utensil goes down and heats the
reflector bowl. This extra heat can discobr .k.
Lift-up cook-top 1. Lii front of cookto~ at both front comers until
the support rods lock into place.
Personal injury and
Product Damage Hazard
l Be sure both support rods are fully ex-
tended and in the locked position. Failure
to do so could result in personal injury from
the cooktop accidentally falling.
l Do not drop the cooktop. Damage can
result to the porcelain and the cooktop
frame.
2. wipe with warm, soapy water. Use a soapy
steel-wool pad on heavily soiled areas.
3. To lower the cooktop, lift cooktop from both
sides while pressing the support rods back to
unlock them. Lower the cooktop into place.
24