36
PROBLEM
The Self-Cleaning cycle
will not work
PROBLEM
Nothing works
CAUSE
The range is not plugged into a properly grounded live outlet with the proper
voltage. (See Installation Instructions.)
You have blown a household fuse or tripped a circuit breaker.
The control knob is not set correctly. Push in the control knobs before
turning them.
You have not set the electronic control correctly. Refer to setting the
electronic oven control section. (See pages 17-19.)
You have blown a household fuse or tripped a circuit breaker.
The coil elements are not plugged in all the way (Models RF370PXG and
RF370LXG). (See “Replacing” on pages 32-33.)
You have not set the control knobs correctly. Push the control knobs in
before turning them to a setting.
TROUBLESHOOTING
Most cooking problems often are caused by little things you can find and fix without tools of any
kind. Check the lists below and on the next page before calling for assistance or service. If you
still need help, see “Requesting Assistance or Service” on page 38.
RANGE DOES NOT WORK
The oven does not work
The surface cooking
areas will not work
WHEN SELF-CLEANING YOUR OVEN
CAUSE
You did not press START/ENTER.
The door is not closed all the way.