27
SETTING THE CONTROLS
USING THE SELF-CLEANING CYCLE
1. Press AUTO CLEAN.
The clean indicator light will light up.
This will automatically set a 31⁄2-hour
Self-Cleaning cycle.
NOTE: There will be a 30-minute cool-down
1⁄2hour before the cycle is over.
2.Set the cleaning time (optional).
If you want a Self-Cleaning cycle longer or
shorter than 31⁄2hours, use the hour and minute
pads to set the cleaning time you want. Press
the “up” (s) or “down” (t) pad(s) until a time
between 21⁄2-41⁄2hours shows on the display.
•Use 21⁄2hours for light soil.
•Use 31⁄2-41⁄2hours for average to heavy soil.
3.Start the oven.
The on and heat indicator lights will
light up.
NOTES:
•Make sure the door is closed all the way. If the
door is open even a little, it will not lock. If the
door is closed, it will lock after you press
START/ENTER.
•Do not attempt to open the oven door while
locking.
4.After Self-Cleaning cycle starts:
The door locked indicator light will light up when
the oven door locks.
5.After Self-Cleaning cycle ends and the oven
reaches normal baking/roasting temperatures:
The clean, door locked, and on indicator lights
will go out and the door unlocks.
Press OFF/CANCEL to clear the display.
AUTO
CLEAN
PRESS YOU SEE
ON
PRESS YOU SEE
TIME
ON
(example for 4 1⁄2-hour
cleaning time)
START
5 SEC
ENTER
PRESS YOU SEE
YOU SEE
PRESS
OFF
CANCEL
ON
ON