WARNING

Electrical Shock Hazard

Disconnect power before making electrical connections.

Connect ground wire to green ground screw in terminal box.

Failure to do so can result in death or electrical shock.

to light

groundbulbs wires

Venting through the wall

wiring knockout

wall vent knockout

wiring knockout

10a. Remove the wall vent knockout and the inner

knockout behind it. Remove top or rear wiring knockout as needed.

14a. Do Not turn on power until installation is complete.

Run wiring through wall or cabinet according to the National Electrical Code and local codes and ordinances.

keyhole slot outline

screw

15a. Start screws into neck area of each of the four

keyhole mounting screw slots marked on the cabinet bottom.

16a.Lift range hood into final position, feeding electrical

wire through wiring opening. Position the range hood so that the large end of the keyhole slots are over the screws. Then push the hood toward the wall so that the screws are in the neck of the slots. Tighten

terminal

box

connector

blower

wiring

connector

black wires

11a.

damper blade (remove if wall cap has damper blade)

mounting screws to cabinet, making sure mounting screws are in narrow neck of slots. Make sure that damper blade rotates up and down freely.

power

white wires

supply

wiring

twist-on

 

connectors

18.

For models requiring direct wiring:

Connect white wiring from the terminal box, light harness and power supply wiring together with twist-on connector.

Connect black wiring from the terminal box to power supply wiring with twist-on connector.

Connect the power supply ground wire and the green ground wire inside the terminal box under the terminal box ground screw.

Use caulking to seal wire opening. Replace terminal box cover.

For cord connected models:

WARNING

Electrical Shock Hazard

Plug into a grounded 3-prong outlet.

Do not remove ground prong.

Do not use an adapter.

Failure to follow these instructions can result in death, fire, or electrical shock.

For your personal safety, this range hood must be grounded. To minimize possible shock hazard, the cord must be plugged into a mating, 3-prong, ground-type outlet, grounded in accordance with National Electrical Code, ANSI/NFPA 70 – latest edition* and all local codes and ordinances.

If mating outlet is not available, it is the responsibility and obligation of the customer to have a properly grounded, 3- prong outlet installed by a qualified electrician.

Do not use an extension cord.

Using a U.L.-listed power supply cord-connection kit:

Follow Power Cord Kit instructions for connecting wiring.

Replace terminal box cover.

19.Turn power supply on.

Attach the exhaust vent connection to the range hood. Check that the damper blade rotates up and down freely, if used.

12a.

Remove the screw holding the terminal box cover. Remove cover.

WARNING

Excessive Weight Hazard

Use two or more people to move and install range hood.

Failure to follow this instruction can result in back or other injury.

keyhole slot

13a.

Lift the range hood into final position and center. Mark on the underside of cabinet the location of the four keyhole mounting slots and the wiring knockout. On some cabinets, filler blocks may need to be added for range hood to attach to cabinet. Set range hood aside on a protected surface.

terminal box

5"

3"

17a . Reinstall blower back into position. Snap blower wire retainer back into blower housing indents.

Reconnect the blower wiring connector back into the terminal box connector plug.

Panel D

Page 5
Image 5
Whirlpool RH8336, RH8330 installation instructions 11a, 12a, 13a, Venting through the wall, Panel D

RH8330, RH8336 specifications

Whirlpool is a brand synonymous with innovation and efficiency in the realm of home appliances, particularly in laundry solutions. Among their noteworthy offerings are the Whirlpool RH8330 and RH8336 models, which stand out for their advanced features and user-friendly technology designed to cater to the modern household.

Both the RH8330 and RH8336 are part of Whirlpool's range of heat pump tumble dryers, combining energy efficiency with superior drying performance. One of the standout features of these models is the A++ energy rating, which ensures that they operate with minimal energy consumption while delivering excellent drying results. This makes them an eco-friendly choice for environmentally conscious consumers.

The Whirlpool RH8330 and RH8336 are equipped with a range of drying programs that cater to various fabric types, ensuring optimal care for your clothes. The programmes include cotton, mixed fabrics, synthetics, and delicate items, allowing users to customize their drying experience based on the load composition. Additionally, these models feature a sensor drying technology, which automatically detects moisture levels in the laundry and adjusts the drying time accordingly. This not only prevents overdrying but also helps save energy and prolongs the lifespan of garments.

In terms of convenience, the models boast a large capacity drum that can handle substantial loads, making them ideal for families or those with frequent laundry needs. The intuitive control panel, complete with a digital display, allows for easy navigation through settings and programs. Furthermore, the delay start feature enables users to schedule their drying cycles at a time that suits them, adding an extra layer of flexibility to laundry routines.

Another notable characteristic of both the RH8330 and RH8336 is their innovative heat pump technology. This system recycles hot air, maintaining a lower temperature during the drying process, which minimizes wear and tear on fabrics. The result is consistently dry laundry that feels fresh and retains its quality over time.

Maintenance is also simplified with these models, thanks to the integrated filter and easy access to the water tank, where condensate is collected. This not only makes cleaning hassle-free but also ensures that the dryer continues to operate at optimal efficiency.

In summary, the Whirlpool RH8330 and RH8336 models combine energy-saving features, advanced drying technology, and user-friendly design, making them excellent investments for anyone looking to enhance their laundry experience while being mindful of energy consumption. With these innovative tumble dryers, Whirlpool continues to set the standard for quality and performance in home appliances.