( Remove the locking 1 screw; NOTICE position of notches.

Lower: move black part toward “LO.”

One notch equals about 10°F (5°C).

Variable Broil Feature:

You might want to broil some foods slower than others. Broiling can be slowed down by setting a lower temperature on the Oven Temper- ature Control Knob instead of “BROIL.” Using a lower temperature will cause the broil element to turn on and off during the broiling so that the food broils more slowly.

When the Oven Temperature Control Knob is on “BROIL.” the Broil Element heats all the time. Set the temperature lower and it heats some of the time. The lower the temperature setting. the shorter are the periods of heating.

NOTE: The Oven Selector must be in the “BROIL” position in order for the Broil Element to heat.

Resetting the Oven Temperature Control Knob:

Does your new oven seem hotter or colder than your old oven? The temperatures in older ovens often shift very gradually. getting hotter or colder without the user really noticing the change. Your new oven is properly adjusted to provide accurate temperatures, but when compared to your old range. the new design may give you different baking results. If you think that the temperature setting on your range needs to be hotter or colder, you can adjust the Temperature Control Knob by yourself.

To adjust the setting, first pull the Oven Temperature Control Knob straight off. On the back. just across from the locking screw, are a row of notches on the black part of the knob and one tooth on the chrome part.

To set your oven about lO”F(5”C) cooler. remove the locking screw and move the row of notches one notch closer-to “LO.” To set your oven about lO”F(5’C) warmer, move the row of notches one notch closer to “HI.” Each notch equals about lO”F(5”C).

Replace the locking screw.

Higher: move black part toward “HI.”

One notch equals about 10°F (S’C).

Minute Timer

Setting the clock to the correct time of day

1.Push in the Minute Timer Knob and turn it clockwise until the digits show the correct time of day.

2.The Minute Timer dial will turn as you set the clock. When clock is set. let the knob pop out. Then. while it is out. turn the Minute Timer hand

counter-clockwiseto “OFF.” If you push in on the knob when setting the Minute Timer. you will change the setting of the clock

Usinq the Minute Timer

Turn the knob until the minutes you want to time show in the

window. When the time you set is up. a buzzer will sound. Turn the dial to “OFF” to stop the buzzer.

The Minute Timer does not start or stop cooking. It only buzzes when the time you set is up. It can be used to time almost any cooking operation. It can even remind you of other things (like when to add softener to the washer).

For the most accurate timing. turn the knob past the time you want. Then turn it back to the setting.

6

Page 6
Image 6
Whirlpool RJE-953PP manual