Whirlpool RSD2400, RSD2000, RSD2200 Special, MeatCheese Drawer, Setting Vari Crisper Control

					SPECIAL		STORAGE			AREAS
To	replace	the	shelves:		Crispers
1.	Tilt the shelf and insert the right rod ends into the				The Vari Crisper		allows the amount of moisture in the
2.	Lower the left side of the shelf			and insert into the	vegetables.
	oblong holes in the left side of the freezer wall. Make
	sure the	shelf	is secure before	.	Move the slide control			to "FRUITS" for a low moisture
					Setting	the	Vari	Crisper	Control
c,	upper portion		of the oblong holesloadingthe freezer wall.		crisper to	be controlled tbr			storing	either fi'uits or
	",				emdromnent	and to "VEGETABLES"				for high moisture,

_".

]I _

i _ ',

Freezer Baskets (select models)

Your refrigerator has three freezer baskets--one

shallow Easy, Glide, one Pizza and one deep Easy Glide. Each glides out for more convenient access to the

frozenright sidefoodfor.TheeasyPizzastoragebasketof frozeisdesignedpizzas,withAll basketslower can be removed for cleaning. In addition, the shallow

Easy Glide and Pizza baskets can be adjusted up or down to accommodate various sized packages.

To remove the baskets:

1.Pull the basket toward you until it stops. Lift the front of the basket and pull until it stops again.

2. Lift the basket up and over the front tabs. To replace the baskets:

Reverse the above procedure.

To adjust tim shallow Easy Glide and Pizza baskets: 1. Remove the basket as directed previousl_

'2. Place one of the bottom two hea, T wires in the track and replace the basket.

To remove tile Crisper Drawers:

1. Pull out to the stop position.

2. Tilt up the drawer front and pull out.

To replace the Crisper Drawers:

1.Align the drawer rollers in the tracks.

2.Lift the drawer front and push in. To remove the Crisper Shelf:

1.Remove the crisper drawers.

2.Remove the glass insert. Reach in from the underside and tilt up. Carefully remove the insert.

3.Lift the front of the crisper shelf and pull out. It may

be necessary to remove the lower ref_'igerator shelves so the crisper shelf can be tilted for removal.

To replace the Crisper Shelf:

Reverse the procedure for removing the crisper shelf.

Meat￿Cheese Drawer

Fresh meat, luncheon meat and cheese need to be

stored in the coldest part of the refrigerator to

maximize storage time. The MeaUCheese drawer

provides these colder temperatures because air from the freezer is directed into the drawer.

Setting the Temperature Control

To regulate the amount of cold air entering the

_

_,

_

J'_"

_ _,

I

I

Meat/Cheese drawer, move the temperature slide control. Set the slide control to the "DELI/CHEESE"

(right) position for storage of luncheon meat and cheese. Set the slide eontrol to the "FRESH MEAT"

(left) position to pro_dde the lowest temperature for fresh meat storage.

PAGE

t' ,''

5