USINGTHEOPTIONAL AUTOMAllCICEMAKER
UnusmoNDELA
MACHINECLA~ONS
AUTOMAllQUE
FACULTAllVE
Before you turn the ice maker on, be sure that it is attached to a water supply. Refer to the “Attaching the optional ice maker to a water supply” section.
0 The ON/OFF lever is a wire signal arm. Push the arm down to start making ice automatically, and push it up to shut off the ice maker.
0 If you remove the ice bin, raise the signal arm to shut off the ice maker. When you replace the bin, push it in all the way and lower the ice maker signal arm to the ON position.
0 It is normal for the ice to be at- tached at the corners. They will break apart easily.
0 The ice maker will not operate until the freezer is cold enough to make ice. This can take as long as overnight.
Wire signal arm
Bras de commande en bmche
on MarChe
Avant de
0 Le levier ON/OFF (marche/arret) est un bras de commande en broche. Abaisser le bras pour com- mencer automatiquement la fabrication de glacons, et pousser le bras vers le haut pour arreter la fabrication de glacons.
0 Pour enlever le bat a glacons, soulever le levier pour arreter la machine a glacons. Pour replacer le bat, le pousser jusqu’au fond et abaisser le levier d’ejection a la position ON (mise en marche).
0 II est normal que de la glace se fixe aux angles. Elle se separera facilement.
0 La machine a glacons ne fonction- nera pas avant que le congelateur ne soit assez froid pour fabriquer des glacons. Ce delai peut durer toute une nuit.
23