Whirlpool RT16VK Changing the control, settings, Removing the drop-in, door trim pieces, Reason

Models: RT16VK RTIGDK

1 24
Download 24 pages 11.26 Kb
Page 9
Image 9
Changing the control

Changing the control

If you need to adjust temperatures in the refrigerator or freezer, use the settings listed in the chart below as a guide. If you have questions, call our Consumer Assistance Center number. (See page 23.)

settings

l Adjust the Refrigerator Control first.

l Wait at least 24 hours between adjust- ments.

l Then adjust the Freezer Control if needed.

CONDITION:

Refrigerator section too warm

Freezer section too warm

Refrigerator section too cold

Ice not made fast enough

Both sections too warm

REASON:

l Door opened often

l Large amount of food added l Room temperature too warm

l Door opened often

l Large amount of food added l Very cold room temperature (can’t cycle often enough)

l Controls not set correctly for your conditions

l Heavy ice usage

l Very cold room temperature

(can’t cycle often enough)

l Door opened often

l Large amount of food added

l Very warm or very cold room temperatures

RECOMMENDED

CONTROL SElTlNGS:

RefrigeratorFreezer

bi z fJ

Ei ,, ;I

li ,, ;I

li ,, g

Removing the drop-in

To remove the trim piece:

1.Remove all items from the shelf.

2.Pull straight up on the trim piece at each end.

To replace the trim piece:

1.Locate each end of the trim piece above the trim pocket opening.

2.Push the trim piece straight down until it stops.

3.Replace items on the shelf.

door trim pieces

J

)

9

Page 9
Image 9
Whirlpool RT16VK, RTIGDK Changing the control, settings, Removing the drop-in, door trim pieces, Condition, Reason, li