Whirlpool SERIES 940 warranty Adding an item during a cycle, Using the delay wash, Cycle

Adding an item during a cycle

You can add an additional item to the dishwasher anytime before the main wash portion of a cycle. See the “Selectinga wash cycle” chart.

1.Lift up the door latch to stop the cycle. Wait for spraying action to stop before opening the door.

2.Open the door and add the item.

3.Close the door, but do not latch it. Wait 30 seconds for the air in the dishwasher to warm up. Doing so reduces the amount of moisture in the vent when restarting a cycle.

-4. Close the door firmly until it latches. The dishwasher resumes the cycle.

Using the delay wash

Use 4 Hour Delay Start to run the dish- washer during off-peak hours to reduce energy usage or to reduce daytime heat buildup in your home.

1. Close door firmly until it latches.

2. Press 4 Hour Delay Start. The pad

3. Press-a Cycle pad. The Delay Start countdown begins when you

q: - = = press the Cycle pad. If you don’t press a Cycle pad within 30 seconds, the Delay Start indicator turns off.

4.If desired, press one or more Option pad(s).

cycle

The 4 Hour Delav Start indicator stays on

NOTES:

lPress 4 Hour Delay Start anytime during the delay-period to start dish- - washer immediately.

lPress Cancel/Drain to cancel the delay cycle. The 4 Hour Delay Start indicator will turn off. Press new Cycle and Option pads.

I..

iiii

lYou can add items to the load anytime during the delay .countdown. After adding items, close the door firmly until it latches. The delay countdown will not continue if the door is not latched.

16